Faculty of Information Engineering and Technology Electronics Department Course : Electronics circuits (ELCT-609) Dr. Ahmed H. Madian Project Dancing flower Project Background : The circuit is taken from dancing flower. A motor at the base of the flower had a shaft up the stem and when the microphone detected music, the bent shaft made the flower wiggle and move. The circuit will respond to a whistle, music or noise. Project Description : It is required to design and implement a dancing flower circuit as shown in figure 1,with a motor respond to sounds from mic only. Students will be divided into groups of THREE students.Each group shall accomplish the following tasks : 1- Hardware Implementation for the circuit. 2- Detailed Report including the theory of operation (DC and AC Analysis and determine transistor operating point),your work and results. 3- Group Evaluation 1 Circuit Harware Implementation : Figure 1 : dancing flower* Important Deadlines :  28 March 2015 : Group names should be submitted to your TA latest by this date. Each group will be assigned a group number on their submission of the list of names.  18 April 2015 : Group evaluations will be held on this day according to a group schedule which will be announced according to your list of groups. The project report should be submitted on the same day.The Circuit must be working. 2 *Source of circuit from: www.talkingelectronics.com