Seed Kit Assembly Instructions

Bright Agrotech, LLC
Seedling Kit Instructions
Contents:




2 Jump Start 12 Pellet Greenhouse packs
1 Jump Start Pellet Refill
1 Jump Start T5 Modular Light Strip & Reflector (with 6-ft. power cord and
flush mount hardware)
2 Arched supporters
Assembly Instructions
1. Assembling arched supporters:
Unpack your Modular T5 Light Strip, including the flush mount hardware.
Using a phillips-head screw driver and the supplied screws, mount the clips
to the arched supporters. Make sure that the clip is facing downward.
Once arched supporters have been assembled, set aside.
2. Assembling structure:
Clip the lamp to the arched supporters and plug in Jump Start 6 ft. power
cord.
Seedling Instructions:
1. Unpack your Jump Start 12 Pellet Greenhouse packs. Pour approximately
1/3 inch water into the bottom of the tray and let pellets wick up water
until expanded. Plant desired seeds into the indents in the pellets. Place
the clear dome over the tray.
2. Place Pellet Greenhouse packs under arched supporters/lamp structure.
Check seedlings every day and water as needed. When seedlings reach
1 inch in height, remove the dome. Continue to check daily.
3. When the seedlings display the first true leaves, transplant them into your
Spring System according to your Spring System Owner’s Manual, section 5,
“Planting A ZipGrow™ Tower.”
4. To provide ideal lighting to seedlings in your Spring System, use a Bright
Agrotech Light Kit, available at the Bright Agrotech online store
(shop.brightagrotech.com). The Bright Agrotech Light Kit is perfect for your
seedlings because they are acclimatized to T5 light. Remember to keep
your Light Kit at least 12 inches away from seedling in your ZipGrow™
Tower.