1. No category

How to Morph Samurai Clawzord to Lobster Mode
By: Linear Ranger
1.Start with the Samurai Claw Battezord.
2.Turn the Claw Battlezord to where the
back is facing you.
3. Remove the Claw Battlezord swords
from the back.
4.Raise the back Lobster legs to access
the Lobster Tail Fin.
5.Remove the Lobster Tail Fin from the
back of the Claw Battlezord.
6.Move the Lobster Legs back down into
place.
7. Lay the Zord on itʼs back and rotate
the Claw Battlezord feet 180 degrees to
where they are now pointing downwards.
8.Rotate the legs of the Claw Battlezord
at the knee until the silver sides are
facing outward, and the peg connectors
are facing inward.
9.Press the legs together and they will
connect via the connector pegs.
10.Take the Lobster Tail Fin from earlier
and connect it via the two pegs on the
Clawzordʼs feet.
11.Rotate the Claw Battlezord arms 180
degrees until the fists are above the
Battlezordʼs head. Move the front
Lobster Legs downward.
12.Bring the Pincer Claws around and
open them.
13.Take the two Claw Battlezord Swords
and connect them to form the Lobster
Head.
14.Take the Lobster Head and connect it
to the Clawzord via the connector pegs.
15.At the Claw Battlezordʼs knees, bend
the now formed Lobster Tail downward
until the tail is pointing down at a 45
degree angle.
16. Clawzord in Lobster Mode is
complete.